Str8BacardiL ************ 41754 Posts user info edit post |
??? 9/17/2006 6:52:47 PM |
Arab13 Art Vandelay 45180 Posts user info edit post |
PCXXXX
XXXX = bandwidth
pc 3200 has 1.1 gb/sec more than pc 2100
based off of the clockspeed of the ram and something 9/17/2006 6:56:33 PM |
agentlion All American 13936 Posts user info edit post |
DDR http://en.wikipedia.org/wiki/DDR_SDRAM
Quote : | "Chip specification
* DDR-200: DDR-SDRAM memory chips specified to operate at 100 MHz * DDR-266: DDR-SDRAM memory chips specified to operate at 133 MHz * DDR-333: DDR-SDRAM memory chips specified to operate at 166 MHz * DDR-400: DDR-SDRAM memory chips specified to operate at 200 MHz
Stick/module specification
* PC-1600: DDR-SDRAM memory module specified to operate at 100 MHz using DDR-200 chips, 1.600 GByte/s bandwidth * PC-2100: DDR-SDRAM memory module specified to operate at 133 MHz using DDR-266 chips, 2.133 GByte/s bandwidth * PC-2700: DDR-SDRAM memory module specified to operate at 166 MHz using DDR-333 chips, 2.667 GByte/s bandwidth * PC-3200: DDR-SDRAM memory module specified to operate at 200 MHz using DDR-400 chips, 3.200 GByte/s bandwidth " |
DDR2 http://en.wikipedia.org/wiki/DDR2_SDRAM
Quote : | "Chips
* DDR2-400: DDR-SDRAM memory chips specified to run at 100 MHz, I/O clock at 200 MHz * DDR2-533: DDR-SDRAM memory chips specified to run at 133 MHz, I/O clock at 266 MHz * DDR2-667: DDR-SDRAM memory chips specified to run at 166 MHz, I/O clock at 333 MHz * DDR2-800: DDR-SDRAM memory chips specified to run at 200 MHz, I/O clock at 400 MHz
Sticks/Modules
* PC2-3200: DDR2-SDRAM memory stick specified to run at 200 MHz using DDR2-400 chips, 3.200 GB/s bandwidth * PC2-4200: DDR2-SDRAM memory stick specified to run at 266 MHz using DDR2-533 chips, 4.267 GB/s bandwidth * PC2-5300: DDR2-SDRAM memory stick specified to run at 333 MHz using DDR2-667 chips, 5.333 GB/s bandwidth1 * PC2-6400: DDR2-SDRAM memory stick specified to run at 400 MHz using DDR2-800 chips, 6.400 GB/s bandwidth " |
9/17/2006 7:05:45 PM |
Str8BacardiL ************ 41754 Posts user info edit post |
SOOO
if my mainboard has the following specs what kind of memory can i get?
Quote : | "
Contents
* Tested Memory * Important Information About Testing Levels * System Memory Features
Tested Memory
Memory testing has been performed under the following category:
Advanced Tested Memory Intel provides the Advanced environmental test procedures, test software and necessary hardware to an independent test lab to perform Advanced testing as requested by the memory vendors. Memory tested by Computer Memory Test Labs (CMTL). Note: This link will take you away from Intel's web site.
Intel Internal Tested Memory Intel's has a limited amount of memory tested for the desktop board. These part numbers may not be readily available throughout the product life cycle.
System Memory Features
The D845GBV board provide the following memory features:
* Two DIMM sockets supporting 2.5 V (only) 184-pin 200/266 MHz Double Data Rate (DDR) SDRAM DIMMs with gold-plated contacts * Unbuffered non-ECC DIMMs only * Maximum total system memory: 2 GB; minimum total system memory: 64 MB * Serial Presence Detect (SPD) DIMMs only * Suspend to RAM
CAUTION: Do not use ECC DIMMs with the D845GBV board. Using ECC DIMMs could damage the Desktop Board.
Integrator's Notes:
* Registered DIMMs are not supported on the D845GBV board. * Remove the AGP video card before installing or upgrading memory to avoid interference with the memory retention mechanism. * This board has been designed to support DIMMs based on 512 Mbit technology for a maximum onboard capacity of up to 2 GB, but this technology has not been validated on this board.
Note: To be fully compliant with all applicable DDR SDRAM and PCI33 SDRAM memory specifications, the board should be populated with DIMMs that support the Serial Presence Detect (SPD) data structure. This allows the BIOS to read the SPD data and program the chipset to accurately configure memory settings for optimum performance.
The following table lists the supported DDR DIMM configurations. DIMM Capacity Configuration(Note) DDR SDRAM Density DDR SDRAM Organization Front-side/Back-side Number of DDR SDRAM Devices 32 MB SS 64 Mbit 4 M x 16/empty 4 64 MB SS 64 Mbit 8 M x 8/empty 8 64 MB SS 128 Mbit 8 M x 16/empty 4 128 MB DS 64 Mbit 8 M x 8/8 M x 8 16 128 MB SS 128 Mbit 16 M x 8/empty 8 128 MB SS 256 Mbit 16 M x 16/empty 4 256 MB DS 128 Mbit 16 M x 8/16 M x 8 16 256 MB SS 256 Mbit 32 M x 8/empty 8 512 MB DS 256 Mbit 32 M x 8/32 M x 8 16
Note: In this column, "DS" refers to double-sided memory modules (containing DDR SDRAM devices on both sides) and "SS" refers to single-sided memory modules (containing DDR SDRAM devices on only one side). " |
9/17/2006 7:08:22 PM |
Str8BacardiL ************ 41754 Posts user info edit post |
http://cgi.ebay.com/1GB-PC2700-DDR-184Pin-Desktop-333MHZ-MEMORY-PC-2700-RAM_W0QQitemZ160028550492QQihZ006QQcategoryZ74942QQrdZ1QQcmdZViewItem
?? 9/17/2006 7:14:26 PM |
Arab13 Art Vandelay 45180 Posts user info edit post |
* PC-1600: DDR-SDRAM memory module specified to operate at 100 MHz using DDR-200 chips, 1.600 GByte/s bandwidth * PC-2100: DDR-SDRAM memory module specified to operate at 133 MHz using DDR-266 chips, 2.133 GByte/s bandwidth
but you could always put faster stuff in there... the mobo should have a list of the numbered bits...
only 2 slots? that sucks
it could mean just any DDR sticks
[Edited on September 18, 2006 at 10:00 AM. Reason : e] 9/18/2006 9:59:08 AM |
Taikimoto All American 2039 Posts user info edit post |
I got a matched pair of DDR550 PC4400 2x256 I can sell ya 9/18/2006 10:54:52 AM |
Str8BacardiL ************ 41754 Posts user info edit post |
I got a 512 in one slot and wanna put a 1gb in the other. 9/18/2006 11:21:49 AM |
Wolfrules All American 1880 Posts user info edit post |
see if you can find what the bandwidth is for the 512 you have currently.. and buy a gig of the same stuff.
googling information on that motherboard, it looks like it supports up to PC2700. 9/18/2006 12:00:57 PM |
mbmorri2 Veteran 136 Posts user info edit post |
^agreed, get identical sticks so you can run dual-channel... Assuming the motherboard can do that. 9/18/2006 1:31:53 PM |
Str8BacardiL ************ 41754 Posts user info edit post |
the chip thats in there is pc2100 9/18/2006 1:37:55 PM |
Str8BacardiL ************ 41754 Posts user info edit post |
is this a good deal?
http://cgi.ebay.com/2gb-2x-1gb-PC2100-DDR-RAM-266MHz-184-pin_W0QQitemZ320029626826QQihZ011QQcategoryZ74942QQrdZ1QQcmdZViewItem 9/18/2006 2:56:45 PM |
Arab13 Art Vandelay 45180 Posts user info edit post |
you can always put in stuff that's faster than the board, it just wont run full out 9/18/2006 3:30:53 PM |