i wish you were closer to charleston. i need my left headlight to work

9/22/2011 9:07:27 PM

For the right amount of alcohol and willing women, I'll roadtrip to Charleston

9/23/2011 9:04:52 PM

[Edited on September 24, 2011 at 6:46 PM. Reason : jaybee = drunk ಠ_ಠ]

9/24/2011 4:30:18 AM

Shoulda left it up there. Far be it from me to get offended at the sight of a gaping cavernous hole.

Oh, and BTTT.

9/27/2011 9:36:19 AM

My wife's 02 Volvo S60 needs the front spring seats, CV boots, and tie rod ends replaced. Any ballpark estimate on labor if I provide the parts?

9/27/2011 11:33:30 AM

PM sent!

9/27/2011 1:18:21 PM

I'm a complete whore...

9/28/2011 1:42:01 PM

know how to rebuild dual hitachi SU carbs? lol

9/28/2011 2:43:18 PM

Actually, yes. You're talking about 240Z or 260Z carbs. I do know quite a bit about them and have gone through them and tuned them before.

9/28/2011 2:54:07 PM

Yep. I have them on my 72 240z. I'm not familiar with them at all, and they either need a tune up or to be rebuilt.

edit: PM replied.

[Edited on September 28, 2011 at 3:03 PM. Reason : .]

9/28/2011 3:00:55 PM

I do miss me some Z car stuff.

9/28/2011 4:38:51 PM

bttt

9/30/2011 11:00:37 AM

Now I'm available to do car work fulltime. I'm willing to work with you during the week, morning or evening.

Thanks to all who have done business with me before and continue to do so!

Dan

10/3/2011 7:08:02 PM

I'm your huckleberry!

10/11/2011 2:53:59 PM

^ I had to actually look that phrase up... http://www.worldwidewords.org/qa/qa-huc1.htm

10/12/2011 10:49:15 AM

Cool phrase. First heard it in Tombstone...Val Kilmer as Doc Holliday. "I'm your huckleberry"...

And yes, I'm still your huckleberry. Wrench for hire. Step on up...

10/16/2011 10:39:49 PM

bump, pm sent

10/17/2011 10:46:49 AM

And replied!

10/17/2011 2:52:35 PM

Thanks Dan, saved me a few hours of bashing my head trying to figure out these brakes.

10/17/2011 7:05:00 PM

David...glad to help out, man. You need to paint "Free Candy" on the side of that thing!

10/18/2011 1:01:48 AM

BTTT

10/18/2011 12:35:18 PM

just asking for some advice here,

If a car goes into a limp mode via transmission, would you have a trasnmission specialist or a manufacturer specialist look at it?

reason i ask is that my 93 audi has gone into a limp mode and i have exhausted allmy thoughts and knowledge and got nowhere. this happend when i was trying to replace the dimmer switch on this mofo.

10/18/2011 1:32:05 PM

Thanks much to Dan for getting me set straight and back on the road after I managed to put a hole in my transmission pan last night. Both the work (getting the pan welded so I didn't have to buy a new one) and the willingness to start the job late so I could actually get home are greatly appreciated! Went the extra mile (quite a few, literally) to help me out.

10/18/2011 2:42:14 PM

Chris, I was glad to get you going, and tickled that the transmission seems to be doing okay. Gotta love the automatics without a dipstick.

10/18/2011 9:06:53 PM

PM sent.

10/21/2011 11:18:55 AM

And answered.

my work week is pretty open...let me know if you need anything done.

10/25/2011 1:52:35 PM

Drive to Greensboro and change the timing belt and water pump on my message_topic.aspx?topic=619302&page=1#15044416

thx

10/25/2011 3:34:59 PM

Ernie...I can do it but prefer to have access to a well equipped shop to do so. We can handle it nicely here in Raleigh, where I have access to all my tools and air.

Sure, I can drive to Greensboro to do it, but what kind of tools, etc, will I have at my disposal?

10/25/2011 5:35:02 PM

I was finally able to respond to your message.

10/26/2011 10:19:04 PM

I'm really interested in getting that work done.

Brakes and carbs for sure.

10/31/2011 11:50:17 AM

And replied via PM. Thanks!

BTTT, folks.

11/1/2011 3:19:26 PM

when you wanna work on the F150?

11/1/2011 5:12:07 PM

That's a damn good question...I gotta get BigBlueRam's Excursion done and out of Jeepman's yard. Then we can talk! I'll get back with you ASAP; I know y'all wanna get'er done as soon as you can.

11/1/2011 5:42:21 PM

Never got a response to my PM, but what do you charge for labor?

11/2/2011 3:55:54 PM

And replied!

11/2/2011 8:56:10 PM

BTTT...open for bidness this week, as I still haven't procured a new day jerb as of yet.

11/6/2011 9:59:17 PM

Back to the top. Open all day tomorrow.

11/9/2011 1:48:03 PM

And my weekend is open as well...let me know if you need anything!

11/11/2011 6:26:21 PM

Still kickin' it in the garage! Let me know whatcha need!

11/19/2011 4:07:21 PM

driver side drum brake on the 'Rolla is making a clicking sound, especially as I come to a stop. Any ideas?

11/19/2011 4:27:52 PM

I need some work done on my Blazer - nothing complicated again, I'm just lazy. I have all the necessary parts, just need some experienced labor.

My 01 4.3L Vortec Blazer has a lower intake gasket leak, common problem due to deterioration from running Dex-cool. I have a complete gasket set for it, so I'd like the lower gasket replaced along with all the other gaskets that have to come off in-between. There is also an updated part for the injection spider that is a drop-in conversion from CPI to MFI - I have this part and removal of the old one is part of the procedure to get the manifold off, so it's common to pop that in there while doing the manifold gasket replacement if you're having problems with the CPI unit (which I am). You just install the new one during reassembly instead of reinstalling the old one.

I will supply all the parts, and I'll bring a couple gallons of fresh coolant to refill with so you don't have to run out and get it. PM me with a quote, and if you have any questions about determining that, I am well versed in the procedure and have a couple good tutorials and resources bookmarked. It usually takes anywhere from 4 to 8 hours for a DIY'er, however, I'm sure it would just be a one-day deal since you know your way around already.

11/20/2011 12:47:20 PM

You have a pm!

11/20/2011 10:08:54 PM

Back to the top!

11/22/2011 11:02:42 PM

even whores do it for free sometimes

gimme a call, SON

11/22/2011 11:46:36 PM

Bttt

11/27/2011 1:46:31 PM

Dan diagnosed some coolant issues in my Camry a little while ago, and now things are running great.

Would do business again! A++++

11/30/2011 10:02:53 AM

Charles, thanks a bunch! It's nice when a solution is simple and cheap like that.

12/1/2011 4:19:51 PM

Call me strumpet...jezebel...whore...whatever you will. Or you can just call me ready to work on your car.

12/13/2011 11:39:57 PM

FIX MY BRAKES WHORE!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

12/14/2011 10:39:17 PM

can you do car audio installation? specifically, an in-dash pioneer nav (double din) into a 06 sti that still has stock everything?

12/21/2011 1:15:20 PM