So I have a 2006 Toyota Corolla and two key fob remotes that are currently unprogrammed. Does anyone know how to program them or know of a website that will tell me?

4/7/2008 11:44:48 PM

Quote :

"1. Driver door open and unlocked. Key out of the ignition 2. Insert the key and remove 2 times in 5 sec. 3. Close and open driver door 2 times in 40 sec. 4. Insert the key and remove it again from ignition. 5. Close and open driver door 2 times in 40 sec. 6. Insert the key in ignition, 7. Close the door, 8. Turn to on and back to lock in 1 second intervals. 1 time for add, 2 times for rewrite, 3 for confirmation 5 for prohibition. (yes, there is no “4”) 9. Remove the key 10. Power lock will cycle to confirm 11. For add or rewrite mode within 40 sec of the confirmation, A. press “lock” and “unlock” buttons of the FOB at the same time between 1 and 1.5 seconds. B. within 3 sec press “Lock” button for more than 1 sec and release. C. If it’s correct, the power door lock will cycle once. If it’s wrong the door lock will cycle twice."

try that. it sounds familiar.

[Edited on April 8, 2008 at 10:11 AM. Reason : ]

4/8/2008 10:07:52 AM

Thank you.

4/8/2008 10:51:19 AM

FYI if anyone has a vehicle with a chipped key and wants a replacement, Oakley's Lock in Durham can handle it. That would be toyotas 03 and up. Including laser cut keys too like lexus, mercedes, etc.

4/8/2008 12:48:38 PM

Quote :

"3. Close and open driver door 2 times in 40 sec."

you can also press the switch instead.

4/8/2008 1:36:06 PM