User not logged in - login - register
Home Calendar Books School Tool Photo Gallery Message Boards Users Statistics Advertise Site Info
go to bottom | |
 Message Boards » » FS: Ballistic "Glass" samples, 1.25'' thick x 12" Page [1]  
MaximaDrvr

10401 Posts
user info
edit post

I have two pieces of 1.25'' ballistic glass that were cut from a gas station remodel. They are very roughly 12" square. (could be 11x13, 12x12 or around there)
This is the same material you see in bank teller windows as well.

I had 4 pieces to start with, and shot one to bits to test its rating, and turned the second into a bullet proof camera case.

The unsupported tested piece took 2-9mm, 2-.40, 2-.357sig, and 3 rounds of .223 before penetration. (your results may vary)

I am looking to get $25 a piece for these, obo.
I am located in Charlotte. This can be shipped, but it is not super light.

11/27/2012 8:39:46 PM

JBaz
All American
16764 Posts
user info
edit post

bullet resistant you mean. not proof...

11/27/2012 9:42:35 PM

synapse
play so hard
60939 Posts
user info
edit post

Quote :
"turned the second into a bullet proof camera case"


For what purpose?

11/28/2012 11:57:21 AM

Netstorm
All American
7547 Posts
user info
edit post

^I was about to ask the same thing. Holmes bout to go do some photojournalism in Palestine?

11/28/2012 12:58:15 PM

NeuseRvrRat
hello Mr. NSA!
35376 Posts
user info
edit post

prob so he could take pics from downrange near the targets

11/28/2012 1:02:57 PM

sumfoo1
soup du hier
41043 Posts
user info
edit post

^ i came in here to post that.

that's what i would do with mine too..

how hard do they cut?

11/28/2012 1:34:00 PM

MaximaDrvr

10401 Posts
user info
edit post

I made the camera case so that I could drop the camera down range and hurl .223 at it in classes, and not be afraid of someone accidentally shooting it, and so spawl from steel would not damage it.

I used a jig saw to cut it. It wasn't easy, but it wasn't difficult either.

Here is an ugly picture of what I made:
I used a ~5" wide cut to make the face and bottom. The thickness allowed me to tap the plastic and use bolt to hold it together. The benefit of bolts, is that if it does take a hit, I can cut a new face for it. I also used CA glue on the joints. The side has a flap with rubber hinge to allow access to the camera. The other piece was used as a shield for the tripod (they aren't cheap either)



[Edited on November 28, 2012 at 1:48 PM. Reason : .]

11/28/2012 1:47:11 PM

smc
All American
9221 Posts
user info
edit post

Very nifty. The Mythbusters drag that stuff around everywhere, but I've read that most of their crew injuries come from accidents with the ballistic glass itself.

I've definitely been in situations where I really wished I had a piece of that in front of my face.

11/28/2012 2:06:33 PM

MaximaDrvr

10401 Posts
user info
edit post

This is thicker that what myth busters uses.
IIRC, in one of their episodes they discovered that their shields weren't actually ballistic rated.

11/28/2012 2:30:31 PM

MaximaDrvr

10401 Posts
user info
edit post

bttt

12/3/2012 7:25:48 PM

tchenku
midshipman
18586 Posts
user info
edit post

see if it can take one 7.62x54r

12/3/2012 8:39:54 PM

 Message Boards » Classifieds » FS: Ballistic "Glass" samples, 1.25'' thick x 12" Page [1]  
go to top | |
Admin Options : move topic | lock topic

© 2024 by The Wolf Web - All Rights Reserved.
The material located at this site is not endorsed, sponsored or provided by or on behalf of North Carolina State University.
Powered by CrazyWeb v2.39 - our disclaimer.