I've got a motorcycle flywheel that someone has hammered on enough to lose it's magnetism. Any way I can get it remagnetized?

4/9/2008 10:57:11 PM

wut?

4/9/2008 10:58:48 PM

flywheel... hammered.. does not compute

but i'll sent you some bent ass mag wheels you can throw on there to match the flywheel

4/9/2008 11:07:14 PM

Quote :

"DOES NOT COMPUTE"

4/9/2008 11:09:01 PM

butterknives?

4/9/2008 11:09:23 PM

no, and you cant replace the magnets either, just get a new flywheel, and probably a new crank if you beat on it that much, try using the correct puller next time

4/10/2008 10:39:49 AM

i've gotta butter knife too!

4/10/2008 11:09:25 AM

it was hammered on by the previous owner

4/10/2008 4:09:53 PM

guessing the retard didnt have a pulley puller when you got your shit worked on

4/11/2008 10:57:55 AM

Meh. It happens. I made a thread a few years ago when I had to pull the flywheel off my Sea Doo. Fucker took me two days with literally hours of turn the wrench, heat, hammer, repeat. I was using a harmonic balancer puller, a three foot breaker bar, a propane torch, and a hammer. Ended up breaking two ratchet handles, two balancer pullers, and gouged up the kitchen floor in the process. I'm sure I destroyed the crank seals with all that heat. Not a big deal since the motor was just going back as a core.

No idea why you would hammer something on though. That's weird.

[Edited on April 11, 2008 at 11:27 AM. Reason : l]

4/11/2008 11:27:31 AM

Think he meant the guy struck the flywheel directly with the hammer.

4/11/2008 1:48:09 PM

what were you hammering on a bike, nothing should be that tight/seized

4/11/2008 10:34:48 PM

^

Quote :

"yeah, really. that's almost as bad as getting your r1 stolen from walmart, the busiest parking lot in town. your curb hitting tree ramming drinking a 2 gallon jug of milk d.u.i. ass is the very LAST person on this board that needs to be calling anyone dumb."

4/14/2008 12:08:56 PM