anyone got any 7.62x51/308 brass they want to sell?

3/2/2014 9:07:38 PM

Looking for a Ruger 10/22. Stainless preferred, but I'm not picky.
Rough condition is fine as long as its not broke all to pieces. I'm looking to rebuild it likely.
I know new at Wallyworld is like $250.

thanks.

3/8/2014 7:07:35 PM

^I almost picked one up at Gander Mountain yesterday. Instead I am buying a used Marlin 60 off a guy in Cary. $299 for the Ruger (with a scope) or $125 for the Marlin.

Worst part is going to be finding ammo without paying 3x what it costs.

3/9/2014 8:31:32 AM

keep an eye on the classifieds on http://www.rimfirecentral.com . receivers show up on there from time to time. they'll have to ship it to an FFL.

3/9/2014 9:36:50 AM

I want to find a decent little scope for this Marlin and a bipod and sling to put on it. Figure that will make it easier for my kids to learn how to shoot with it.

3/9/2014 10:47:44 AM

They'll be better shooters if they learn the iron sights first.

With that said, the Simmons 22 Mag series of rimfire scopes is pretty good for the money and you can get them with 3/8" tip-off rings (what you need for that Marlin) for under $50. Take your pick between the 3-9x32 variable or the 4x32 fixed power.

For a sling, get 1.25" swivels and a GI style web sling.

I use a Harris bipod and everything sucks compared to them, but they're expensive. Rather than buy a cheap bipod, you'd be better off to just take the legs of some old jeans, sew them up and fill with sand to make your own shooting bags. Much more versatile for range use. Spend the money you save on ammo.

3/9/2014 11:30:26 AM

^Is there a way I could setup the scope so that it would sit high enough that they could still use the iron sights as well? Would be nice to have the option to do one or the other.

3/9/2014 11:48:07 AM

There are see-through scope mounts, but the problem is they make the scope sit so high that a proper cheek weld becomes unattainable, especially for a small kid.

Leave off the scope and mount a set of Tech Sights. They operate on the human eye's natural tendency to seek the center of a circle.

Google "liberty training rifle".

3/9/2014 12:05:47 PM

Might work better for them as they have a Daisy 499 which has the circle sights, so they would be used to the circular sight picture with a Tech Sight.

3/9/2014 12:23:45 PM

Since I saved a lot of money by getting the used Marlin 60, I have a bit left that was earmarked to getting a gun. I also wanted a Mossberg 500 as I really enjoy skeet shooting. My brother has one and I've borrowed it before to shoot with, but I just want one of my own. I found this one posted today. Does this sound like a good deal:

http://www.carolinashootersclub.com/threads/162195-WTS-Mossberg-500A-12-Gauge

3/10/2014 11:12:11 AM

Not a bad price

3/10/2014 11:34:13 AM

^Think I'm going to pass. Doesn't have a bead sight on the front. Not a huge thing, but I'll wait until another comes up with it equipped already. Save me from having to spend the cash on that. Thanks though

3/10/2014 12:12:17 PM

yo Stonerman, Palmetto State Armory has new 10/22 carbines for $199

3/12/2014 9:51:46 PM

Any interest on the bearcat? Will consider a reasonable offer.

New/unfired Ruger Bearcat 4" 22 stainless revolver. I bought this for my daughter to shoot but she wanted a rifle instead so we bought something else. $450 FTF.

3/14/2014 9:49:45 PM

Buy my Kel-Tec PF-9

Learn about the PF-9 here: https://www.keltecweapons.com/our-guns/pf-9/pistol/

I'm selling my PF-9 with black frame and Cerekoted OD Green Slide. Included is one 7-round magazine and two 8-round magazines. I'm also including two DeSantis IWB holsters.

The gun has been 100% reliable in my use. There is some minor holster wear on the slide which is shown in the pictures below.









I'm asking $300 for the gun, the 3 magazines, and the two holsters. The original case and user's manual is included.

[Edited on March 19, 2014 at 10:34 AM. Reason : bad crazy code]

3/19/2014 10:32:35 AM

^PM sent on the PF9

3/20/2014 10:16:48 AM

PF-9 sold

3/21/2014 2:46:47 PM

Having finished my DDLES Glock build, I am selling my Colt mag AR.

I have fired approximately 1k rounds through it, and have had zero malfunctions of any kind.

Build Prices: $1368 + parts shipping and transfer fees.
Lower: $295
LPK: $60
KNS Pins: $30
Buffer tube kit: $50
9mm buffer: $25
Magpul CTR: $75
Magpul Grip: $20
Upper Rec: $175
Barrel Nut: $8
Barrel: $225
Flash Hider: $10
big latch CH: $40
9mm BCG: $220
3x Promag mags: $50
1x metal mag: $25
YHM FF tube: $60

The colt lower occasionally can be found in stock, but sells out very quickly. There is a 6+ month wait list to buy directly from DDLES.

This [B]WILL NOT[/B] come with the Samson Evo rail. It will have the alternate tube pictured.

As shown above, I have a bit over $1350 invested in this AR in parts alone. With shipping and transfers, it is over $1400.
I am asking $1200, slightly negotiable.

3/24/2014 10:53:44 AM

9mm AR is SPF

3/24/2014 10:26:22 PM

I have a Glock 23 for sale. I believe it's a Gen 4, but I'll have to check. I've probably put 250 rounds through it and bought it new; wanting to get rid of it so I can reduce my handguns to just 45 and 9mm for reloading purposes. The gun comes with 100rds of ball ammo and ~40 rounds of self defense ammo. Gun also comes with the Glock carrying case and two magazines. Pictures available on request. I'm in the Raleigh area. Would like to get $500 for everything.

3/31/2014 9:54:55 AM

3 mags and interchangeable back straps?
I'm interested.

3/31/2014 10:10:52 AM

Are you still selling the Glock?

4/22/2014 4:30:16 PM

My brother in law is selling is Taurus .380 for $400 OBO Everything in the picture is included.
PM or post if interested.

4/25/2014 11:31:29 PM

so the laser was more than the gun

[Edited on April 29, 2014 at 7:19 PM. Reason : rain]

4/29/2014 7:18:19 PM

The laser is a crimson trace on the Taurus TCP 380.
$400 OBO is what he is asking.

Other than that, I know very little about the gun.

4/29/2014 9:49:16 PM

S&W .38 Model 10-5 revolver
3 inch bull barrel
Gun has been reblued, looks great
Fantastic trigger, very smooth
Comes with Houge Monogrip

Photos in my gallery

$275.00

Pistol permit or CCW required for purchase

**Thinking about selling my Mosin Nagant M-44 as well, photos in gallery. PM if interested**

5/1/2014 9:04:32 PM

Model 10-5 SOLD

Mosin Nagant M-44 still available

5/4/2014 6:57:22 PM

^^^^^ PM sent on the Tarus 380.

5/28/2014 10:44:13 AM

Up for trade is my Sig Sauer® P938 Extreme. Purchased new in 2013, it has a manufacture date of 26-Apr-2013

The pistol comes w/ a single, seven (7) round magazine.

It comes with the original box and papers. The factory holster and six (6) round magazine are not included in the transaction because they were stolen along with my range bag.

I have put less than 150 rounds through this pistol and it is in very good to excellent condition. It has been carried, but mainly in a soft pocket holster.

Looking to trade for one (1) of the following:

New or slightly used S&W M&P 340
New or slightly used P224 SA/DA in .40 S&W
New or slightly used P239 SA/DA in .40 S&W

Not interested in anything else.

This pistol is located in Greensboro, but can travel within a reasonable distance.

All laws will be followed regarding the sale of this weapon.

These additional accessories are available to be purchased or traded for depending on your offer:

20 Round Box of 124 gr. Speer Gold Dot SBHP
Garrett Industries Silent Thunder Slim Appendix Carry
MTR Custom Leather Ankle Holster
Remora Pocket Holster

6/19/2014 4:49:09 PM

The above package is now for sale. $675 for everything or make an offer.

6/21/2014 8:40:16 AM

P938 is sold

6/21/2014 11:57:49 AM

anyone want 72 rounds of 12 guage birdshot? its 2 3/4 winchester. have 72 rounds just sitting around. i maybe go target shooting once every few years. make an offer.

6/21/2014 8:15:25 PM

Sig Pro 2340 Blueline edition for sale
Great condition, approx 1000 rounds through it
3 mags
Winchester white box thrown in (maybe more if I have it)
$400

[Edited on June 27, 2014 at 2:24 PM. Reason : Bore snake and uncle mikes kydex holster (lefty) too ]

6/27/2014 2:23:51 PM

Also looking for a P239 in .40.

7/5/2014 10:45:17 AM

I have a Sig Sauer® P232 stainless w/ SIGLITE® Night Sights for sale. Comes with the factory Hogue finger groove rubber grips and two (2) magazines, box and papers. This pistol is located in Greensboro, but I can travel within a reasonable distance. Asking $625 or best offer.

*Sale will include a couple of holsters and some loose .380 (Speer GDHP).

7/8/2014 10:19:53 PM

Full package up for sale:

Remington 700P, long barrel
.300 Ultra Mag

-Upgraded Timney 510 trigger
-Leupold Vari-X II 6-18x40
-Leupold mounting rings
-Butler Creek flip-open covers
-Padded sling
-Buttstock ammo sleeve
-TSA approved aluminum case
-approximately 60 rounds, approximately 30 empty cases

All work on the rifle was completed by Ogburn Gunsmith
Rifle has less than 100rds down the barrel.
Rifle is in immaculate condition, never had more than 10 rds put through it in one day.
There is an old pic in my photos, but can provide updated pics of full package via email.

$1700, includes shipping to your favorite FFL
$1600, if delivered


info/questions/etc: mtns2sea@gmail.com

7/15/2014 6:07:48 PM

Looking to trade my Glock 23 .40 for another .40cal handgun. Ideally I'd love to have an M&P, but would love a Sig/HK as well (obviously would add cash).

7/16/2014 8:50:14 AM

PM sent regarding the Sig Sauer® P232 stainless - please call

7/17/2014 2:29:35 PM

P232 is Sold

7/17/2014 8:42:25 PM

M76 8mm Mauser made by assault weapons of Ohio about 50 rounds through the gun
Comes with everything in the picture.

Msrp for gun now is $1496 with 2 10 round mags

Mine comes with 4 10 round mags and 1 28 round mag.
($350 in mags alone)

I'd like to sell it for $1400

7/20/2014 2:57:34 PM

sigh, I saw that pic and my first thought was 'oooh, 7.62X54R' then I got all sad

7/20/2014 6:46:03 PM

8mm is still waaayy cheaper than most rounds.

http://www.jgsales.com/8mm-mauser-romanian-154gr-fmj-surplus-ammo-on-clips,-340rd-sealed-tin.-p-1675.html

7/21/2014 7:51:50 PM

Man, that thing is sweet. Wish I had the dough for more guns, but I just dumped a pile of cash on a PSL recently.

8/13/2014 1:31:33 PM

where did you get the psl from ?

i still want one lol...

8/28/2014 7:59:02 PM

where do you guys usually buy your handguns from? I'm in the market for one. Something small enough for CCW when I get it. 9 MM or .40 would be preferred.

8/29/2014 1:56:40 AM

budsgunshop.com

8/29/2014 6:56:55 AM

fuquay gun

8/29/2014 11:28:04 AM

I've had decent success at gun shows, particularly at Metrolina/CLT and the Raleigh event, it helps if its a common brand/model as there are multiple vendors and sometimes they'll come down enough to make it worthwhile.

How much do you guys barter/negotiate with pawn shops? Their prices always seem higher than online and the few I've gone into weren't budging at all.

8/29/2014 2:51:15 PM

pawn shops (and most brick and mortar gun shops, for that matter) don't make money selling guns to folks who shop around. part of it is that they just can't compete with the high volume sellers like buds. the other part is that many of them prey on folks who don't know much about guns or their values. sure, you can stumble across a sale or good price, find a guy who's willing to haggle on something that's been sitting around a while, or get a deal on something used, but it's rare.

i have a buds preferred FFL in town with a very low fee. buds ships free. i almost always come out ahead buying online.

[Edited on August 29, 2014 at 4:01 PM. Reason : adfs]

8/29/2014 3:58:59 PM

Fuquay Gun for a local shop

8/29/2014 4:37:47 PM